PBT RESIN for Optical Fiber Cable

We focused on PBT for optical fiber cable production more than 10 years

Quantity:

Inquire Add To Basket

Share this:

Brand:Ying-M

Product Description

Product Description.png

Product use
I produced the model 61008 dedicated fiber optic cable PBT is polymerized by PTA and BDO.,Through the solid phase modified into cable for PBT. This material is suitable for the production of all beam tube optical cable.
This material has the advantages of easy molding.ointment has good compatibility, good mechanical properties and electrical properties, hydrolysis resistance. It is widely used in cable industry.
Our company's PBT is suitable for all beam tube production ( φ1.5~12mm) , Has good processing properties and mechanical properties.

yinmao产品详情_04.png

Technical indicator

To use PBT-61008 ,the machine should as following set:

Item		Injection molding machine
heating temperature		235°C-280°C
liner speed		10-500m/min
tube tolerance		+ / - 0.05mm
cooling water temperature		15°C-60°C

Production : PBT-61008

S/N	Inspection Item	Unit	Standard Requirements YD/T1118.1-2001	Inspection Result
1	Density	g/cm3	1.25~1.35	1.34
2	Melting Range	℃	210~230	222
3	Melting Index	g/10min	7.0~15	9-10
4	Tensile Strength at yield	M Pa	≥50	55
5	Elongation at yield	%	5~10	6.8
6	Elongation at break	%	≥100	280
7	Modulus of elasticity in tensile	M Pa	≥2100	2280
8	Shore Hardness		≥70	80
9	Modulus of elasticity in flexure	M Pa	≥2200	2320
10	moisture content	%	≤0.1	0.05
11	Izod impact strength（23℃）	KJ/m2	≥5	5.6
12	Heat distortion temp 0.45M pa	℃	≥170	181
12	Heat distortion temp 1.8M pa	℃	≥55	58
13	Coefficient of volume Resistance	Ω.cm	≥1.0* 10¹⁴	3.92*10¹⁴
14	Water absorption	%	≤0.5	0.3

Note:
1. Do not open before using . The production should keep dry and sealed.

2.Store in dry place

3.Pls read the instruction manual and dry the granuales before used for 2-4 hours by hopper dryer at 120℃-140℃

PBT RESIN for Optical Fiber Cable

PRODUCT CATEGORIES

COMPANY

CONTACT US